- Refractory[6]
- Other Refrigeration & Heat Exchange Equipment[2]
- Other Electrical Equipment[6]
- Other Electronic Components[1]
- Other Energy Related Products[1]
- Other Non-Metallic Minerals & Products[6]
- Other Hardware[1]
- Chemical Product Machinery Parts[1]
- Other Mechanical Parts[1]
- Glass Product Making Machinery Parts[2]
- Industrial Heater[4]
- Industrial Furnace[6]
- Metal Processing Machinery Parts[2]
- Boiler Parts[1]
- Laboratory Heating Equipments[6]
- Refrigeration & Heat Exchange Parts[1]
- Glass Processing Machinery[4]
- Graphite Electrodes[1]
- Jewelry Tools & Equipment[1]
- Dental Equipments[5]
- Electrical Wires[6]
- Other Wires[5]
- Cast & Forged[5]
- Other Lab Supplies[1]
- Testing Equipment[6]
- Other Metal Processing Machinery[1]
- Drying Equipment[6]
- Other Chemical Equipment[1]
- Lab Drying Equipment[3]
- Boilers[1]
- Heat Transfer Equipment[1]
- Tungsten Sheets[6]
- Electrical Ceramics[1]
- Ceramics[6]
- Ceramic Fiber Blankets[6]
- Ceramic Fiber Boards[6]
- Temperature Instruments[6]
- Quartz Tubes[6]
- Other Machinery[3]
- Drill Bit[6]
- Mining Machinery Parts[2]
- Other Machine Tools Accessories[1]
- Contact Person : Mr. Guo Amos
- Company Name : Dengfeng Jinyu Thermoelectric Material Co., Ltd.
- Tel : 86-371-63355891
- Fax : 86-371-63355893
- Address : Henan,Dengfeng,RenCun, Donjindian, Dengfeng
- Country/Region : China
- Zip : 450000
ISO9001 Silicon Carbide heating elements W type
Related Product Searches:ISO9001 Silicon Carbide heating elements W type,High Quality,silicon carbide heating elements, sic heating elements,JY-SC020303
W Shape SiC Heating Elements with the terminals at one end, are designed for three-phase power source applications, such as the float glass process.
When you place an order of the W Shape SiC Heating Elements, please give following information:
OD:Outer Diameter;
HZ:Length Of Hot Zone;
CZ:Length Of Cold Zone;
OL:Total Length, A: Shank Spacing
Order Sample of the W Shape SiC Heating Element
W Shape: OD=20mm, HZ=250mm, CZ=350mm, OL=625mm, A=52mm,
Resistance: 0.9Ω Specify As: 20/250/625/52/0.9Ω
Notes for using and installing the heater:
1. Heater should be protected against damp during storing or installing to ensure the performance of the heater.
2. In order to be sure of well-distributed lod of each and groups, heater should be divided before assembling. The tolerance of the resistance of each one cannot exceed by 10% each other.
3. Heater is hard and brittle, please be careful when assem bling and maintaining so as to avoid damage.
4. When operating the electric furnace at the beginning, the voltage should be increased slowly and cannot be fully loaded at once. Otherwise the larger current will be resulted in the damage of heater.
5. When heater is damaged and need to be changed, the resistance of new ne should follow the increasing resistance. If many are damaged or resistance increased too much, heater should be changed.
6. Silicon Carbide (SIC) heating elements is a non-metal electric heating element made from SiC as its main raw materials. It has some specific properties, such as low expansion coefficient, little deformation, stable chemical property, long service life, easy installation and maintenance, etc.7. Usage: Silicon Carbide (SIC) heating elements can usually make use for furnace which temperature from 600-1600. It can be directly used in an air atmosphere, without any protection atmosphere. It is extensively used in the fields of metallurgy, ceramics, glass, machinery, analysis test, semiconductor, science & research and so on.
Packaging & Delivery
Packaging: | Plastic paper inside, Polyfoam filled, Wooden box outside. |
ISO9001 Silicon Carbide heating elements W type
